Table of Contents
Advertisement
Procedure
The following explains how to establish and disconnect a dual connection.
1.
Match the serial settings of the target ports of the client device (Device A) and
the server device (Device B).
2.
Log in to the client device (Device A), and then execute the redirect command
using the IP address or server name of the dual connection destination.
(It will take a moment for control to return to the shell once the command is
executed.)
2:26PM on Friday, 24 February 2006
login: admin
Enter↵
Password:
Enter↵
Last login: Fri Feb 24 14:28:34 2006 on console
$ redirect on ip 192.168.0.175 -s
$
3.
Log in to the server device, and then execute the redirect command using the
IP address and client name of the dual connection destination.
(It will take a moment for control to return to the shell once the command is
executed.)
2:26PM on Friday, 24 February 2006
login: admin
Enter↵
Password:
Enter↵
Last login: Fri Feb 24 14:28:34 2006 on console
$ redirect on ip 192.168.0.178 -c
$
4.
To disconnect a dual connection, log in to the product from a local console, and
then execute the following command.
(It will take a moment for control to return to the shell once the command is
executed.)
$ redirect off
Enter
$
During a dual connection, other connections (terminal emulator, Ether-direct, or
COM direct) cannot access the target port.
During a dual connection, target port logs are stored.
Enter↵
Enter↵
SERVIS IP-Serial
1p Converter
User's Guide
3
37
Advertisement
Table of Contents
