Set Port Number; Return To Main Menu - Fujitsu FX-3001SR User Manual

5.1.6.5 set port number

Overview Sets the TCP port number during an Ether-direct connection
(read only 1, read only 2, write only and read-write).
MAIN MENU → 6. serial → 5. set port number
Menu location
Command port
Output The TCP port number is being set to an arbitrary value.
--- 6. SERIAL MENU --------
1. set target port
2. set redirect [OFF]
3. set local console
4. set VT100
5. set port number

0. return to MAIN MENU

---------------------------
select > 5
Enter↵
<set read only 1>
change [30000] to : 30005
<set read only 2>
change [30001] to : 30006
<set write only>
change [30002] to : 30007
<set read write>
change [30003] to : 30008
--- 6. SERIAL MENU --------
1. set target port
2. set redirect [OFF]
3. set local console
4. set VT100
5. set port number
0. return to MAIN MENU
---------------------------
select >
Notes
(1) The value can be set from 5000 to 65535.
(2) If Enter is pressed in a blank space, the current setting remains.
(3) If a five-digit port number 65536 or over is set, an error will occur and
the number will not be set but the next option can be set.
(4) If six or more digits are entered, the screen will return to the SERIAL
MENU.
5.1.6.6 return to MAIN MENU
Overview Returns to the MAIN MENU.
Refer to 4.1.17 port Command (page 70)
Enter↵
Enter↵
Enter↵
Enter↵
SERVIS IP-Serial
143
1p Converter
User's Guide
5