Table of Contents
Advertisement
4.1.12
useradd Command
Overview
Syntax
Parameter(s)
Password required?
Notes
(1) Up to four users can be added. If more than four users are specified, an
error occurs when registering.
(2) The user name has a limit of 63 characters.
(3) Pressing the Enter key without entering anything when setting the
password during a user registration will register the user without a
password. Afterwards, the passwd command can be used to set a
password.
Example (from the local console)
Registers a general user called "tester1".
$ useradd tester1
administrator password:
Changing local password for tester1.
New password:
Retype new password:
useradd completed.
$
If more than four users are specified, the following is displayed during
registration and the users are not registered.
$ useradd tester5
can not add user. entry over.
$
Registers a user with the specified user name.
useradd <username>
username = The user name to be registered.
No
Enter
Enter
Enter
Enter
Enter
SERVIS IP-Serial
65
1p Converter
User's Guide
4
Advertisement
Table of Contents
