Ip-900D/Ip-900Iid (Decoder) - Fujitsu IP-900E Hardware User's Manual

Chapter 2 Installation and Connection
2.3.2

IP-900D/IP-900IID (Decoder)

2 Digital and 1 analog video output connectors are equipped for connecting with video input equipment.
- SDI Video Output (Digital Video)
Connect to SDI of IP-900IID using BNC cable.
- HDMI Output (Digital Video)
Connect to HDMI connector of IP-900D/900IID using HDMI cable. It outputs Digital signal.
- Analog Video Output
Connect to ANALOG VIDEO OUT connector of IP-900D/900IID using BNC cable with NTSC or PAL
signal.
2 Digital and 1 analog audio output connectors are equipped for connecting with audio input equipment.
- Digital Audio Output
SDI Embedded Audio and HDMI audio are supported.
- Analog Audio Output
Connect ANALOG AUDIO OUT
The impedance is 1KΩ unbalanced. Inputting a signal outside the rated value will cause
a problem in terms of audio level and noise.
The figure of cable connections are shown below.
For details about connectors and cables, see Section 4.2, "Cable and Connector Details."
NOTE:
For electrical specifications, see Appendix 2.3, "Function Specifications."
IP-900E/IP-900D/IP-900IID
(L), (R) using the cable with RCA connector.
100-240V
FG
Figure Audio and video input device connections
It outputs Digital HD-SDI or SD-SDI signal.
10/100BASE RS-232C
D
100M
PWR ALM
LINK
RDY DEC
/ACT
MNT
Video & Audio Input Device
40
L R
ANALOG AUDIO OUT