Table of Contents
Advertisement
Advanced version only
3.10. CF Management of Environment Settings
Function overview
This product can record in text format the various configuration files, which are
required for running the product, to a CF card. Configuration files in the RAM
disk/flash ROM are saved to the /CF/conf directory by executing the export
command.
Refer to
4.1.32 export Command (page 89)
Settings can easily be modified by editing the configuration files on the CF card from
a PC, inserting the CF card to the product, and then importing the files.
Refer to
4.1.31 import Command (page 87)
Also, to run the product with a desired setting, copy the setting on the CF card,
insert the CF card, and import the files to achieve the same setting environment.
The following shows the configuration files that can be managed by the CF card.
List of configuration files
Directory
/CF/conf/
If there are no configuration files in the CF card (e.g. right after formatting it),
executing the export command exports all of the configuration files to /CF/conf.
Also, /CF subdirectories can be accessed with FTP/SFTP, allowing configuration
files to be "put" remotely, therefore modifying settings in that manner. For details,
refer to the following.
Refer to
3.12 FTP/SFTP Connection (page 47)
File name
Content
ntp.conf
NTP config file
localtime
Time zone symbolic file
portmng.cf
Configuration definition file
hosts
Host name definition file
port.conf
Serial port config file
ifconfig.sm0
Network card config file
users
User config file
rc.conf
Network config file
passwd
Password file
master.passwd
Password master file
group
Group config file
services
Network service/port config file
snmpd.conf
Snmpd config file
SERVIS IP-Serial
43
1p Converter
User's Guide
3
Advertisement
Table of Contents
