Flashrom Test - Fujitsu FX-3001SR User Manual

7.2.1.2 FlashROM test

This test confirms the operation of the local bus and the read/write function for
data.
The 32 MB address range for the flash ROM is 0x10000000 to 0x11FFFFFF.
The address range to test specifies the offset address (0x0000000 to
0x1FFFFFF) in the flash ROM.
(1) Saving data on the flash ROM
In order to read/write using the flash ROM, confirm whether to save the
program on the flash ROM.
If Y is selected, all the programs in the flash ROM are saved on the SDRAM.
After the flash ROM test is finished, they are written on the flash ROM again.
Data R/W test
----------------
1: SDRAM
2: FlashROM
3: NIC
4: RTC
5: Compact Flash
6: UART
7: return
select > 2
Enter
Save basic program from FlashROM? [Y/N] > Y
save program ... done
FlashROM test
---------------------
1: data compare test
2: bus integrity test
3: return
select > 2
Enter
Start address? [0x00000000:default, -1:top]
End address? [0x00FFFFFF:default, -1:bottom] >
Check FlashROM
Test 0x00000000 - 0x00FFFFFF
write 0xAAAAAAAA/0x55555555 ... block 134
verify ... success.
FlashROM check done.
FlashROM test
---------------------
1: data compare test
2: bus integrity test
3: return
select > 3
Enter
Recover programs to FlashROM ... block 269
Recover programs to FlashROM ... verify done.
Enter
>
Enter
Enter
SERVIS IP-Serial
1p Converter
User's Guide
7
167