Fujitsu FX-3001SR User Manual page 40

Waiting for command input: A state where a prompt was displayed after a hotkey
$ terminal port1
[launch Terminal-Emulator -- press `^Ec?' to help]
3
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-8 on an i686
localhost.localdomain login:
[
When pressing a hotkey, "[" is displayed below the terminal, and a prompt is
displayed.
A terminal emulator command can be entered in this state.
Command result output status: A state where the results of a command key are
$ terminal port1
[launch Terminal-Emulator -- press `^Ec?' to help]
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-8 on an i686
localhost.localdomain login:
[port status]
local: 115200 np 8 1 none
port1: 115200 np 8 1 none
-- press Enter key to continue --
Entering the Display Port Status command "x" will display the above results.
SERVIS IP-Serial
30
1p Converter
User's Guide
was pressed from the target communication status, the
communication with the target was suspended, and the
system is currently waiting for input of a terminal
emulator command key.
output. Pressing Enter returns to the target
communication status.