Fujitsu FX-3001SR User Manual page 169

Error Message
code
0012 CF Sub-board not present.
Error Code 0012
0013 CF Storage Card not found.
Error Code 0013
0014 CF Power ON failure.
Error Code 0014
0015 System program not found in CF Storage
Card. Error Code 0015
0016 File system not found in CF Storage Card.
Error Code 0016
Detail
DIP switches were set to boot from the CF card but
the CF sub-board is not attached.
Solution:
For the FX-3001SR, the CF sub-board is not
attached. Turn off DIP switch 1.
For the FX-3001SRF, contact our technical support.
DIP switches were set to boot from the CF card but
the CF card was not inserted in the slot.
Solution:
Insert the CF card in the slot and press the RESET
button or turn the power off and then back on.
If that does not work, contact our technical support.
The CF card could not be turned on when booting
from the CF card.
Solution:
Press the RESET button or turn the power off and
then back on.
If that does not work, contact our technical support.
The system program was not found in the CF card
when booting from the CF card.
Solution:
Check that a bootable CF card is inserted.
Reinsert the CF card in the slot and press the
RESET button or turn the power off and then back
on.
If that does not work, contact our technical support.
The file system was not found in the CF card when
booting from the CF card.
Solution:
Check that a bootable CF card is inserted.
Reinsert the CF card in the slot and press the
RESET button or turn the power off and then back
on.
If that does not work, contact our technical support.
SERVIS IP-Serial
1p Converter
User's Guide
7
159