Snmp Command - Fujitsu FX-3001SR User Manual

4.1.7
Overview
Syntax
4
Parameter(s)
Password required?
SERVIS IP-Serial
60
1p Converter
User's Guide

snmp Command

Sets SNMP to ON/OFF.
When SNMP is enabled, all users are allowed to gain
access via a read community called "public".
This setting can also be changed by editing the
/CF/conf/snmpd.conf file (Advanced version only).
snmp [on | off]
None = Displays the current SNMP setting.
on = Enables SNMP.
off = Disables SNMP.
Example (from the local console)
Enables SNMP. (The password is not displayed.)
$ snmp on
Enter
administrator password:
snmp setting on.
$
Displays the current SNMP setting.
$ snmp
Enter
<snmp> on
$
Disables SNMP. (The password is not displayed.)
$ snmp off
Enter
administrator password:
snmp setting off.
$
Yes (* same as the administrator password)
Enter
Enter