Fujitsu FX-3001SR User Manual page 6

Connection to Servers and Countermeasures against Static
Electricity
When attaching/removing connectors to connect the target port of this product to
an RS-232C port of a server, ensure that this product is turned off. In addition, be
sure to discharge static electricity before connecting the cables.
Twisted pair cables (e.g. LAN cables) may be charged with static electricity
depending on your operating environment. Connecting twisted pair cables
charged with static electricity to devices including this product could cause a
malfunction or failure of the devices or their LAN ports.
Use a static eliminator or any other tool immediately before connecting, and
discharge static electricity in twisted pair cables to ground wires.
Note that if the cables remain unconnected for a long time after discharging static
electricity, they may be charged with static electricity again.
High Safety Measures
This product was designed and manufactured for general use; for situations such
as clerical, personal, home, and general industrial use. It was not designed or
manufactured for uses that involve direct and serious risk to life such as nuclear
control systems, aircraft auto-pilot control systems, air traffic control systems,
mass transportation control systems, medical life support equipment, military
missile launch control systems, or any other situations that require a high degree
of safety or in which such a degree of safety cannot be ensured.
Do not use this product unless taking appropriate measures to ensure safety in
such situations. Neither Fujitsu Component Limited nor its affiliates shall be
responsible for any damages that occur to the user of this product or a third party
due to the use of this product in a situation that requires advanced safety
measures.
SERVIS IP-Serial
vi
1p Converter
User's Guide