Encrypt Command - Fujitsu FX-3001SR User Manual

Advanced version only
4.1.29

encrypt Command

Overview
Syntax
Parameter(s)
Password required?
Notes
(1) -l and -c cannot be specified together.
(2) When the CF card is not mounted, an error is thrown.
(3) When a key has not been set using the changekey command, an error
is thrown.
Example (from the local console)
Encrypts the configuration file "file1".
$ encrypt -c file1
encoded file1.
$
When no key is set, the following is displayed.
Execute the changekey command to set an encryption key.
$ encrypt -c file1
An encode key no set up.
$
Encrypts all configuration files.
$ encrypt -c
Do you encode all file? (y or n) y
encoded ntp.conf.
encoded portmng.cf.
encoded hosts.
encoded port.conf.
encoded ifconfig.sm0.
encoded users.
encoded rc.conf.
encoded passwd.
encoded master.passwd.
encoded group.
encoded services.
encoded snmpd.conf.
encoded localtime.
$
Encrypts log files and configuration files.
This uses the common key cryptography AES (256 bits).
encrypt <-l | -c> [filename]
-l = Encrypts log files.
-c = Encrypts configuration files.
filename = Specifies the filename to be encrypted.
If no filename is specified or when "all" is specified, all
files are encrypted.
No
Enter
Enter
Enter
Enter
SERVIS IP-Serial
85
1p Converter
User's Guide
4