Fujitsu FX-3001SR User Manual page 167

Servis ip-serial 1p converter
Table of Contents

Advertisement

Error
Message
code
0004
File system Inflate NG! XXX
Error Code 0004
0005
Self Diagnostic program Inflate NG!
XXX Error Code 0005
Detail
Failed to decompress the file system.
The number XXX is the error number (decimal).
100: Failed to secure heap buffer (1024 bytes of
work area for decompression could not be
secured)
101: Bad compressed file (bad magic header; the
first two bytes are not 0x1f, 0x8b)
102: Bad compressed file (bad magic header; the
third byte is not 0x8 or bits five to seven of
the fourth byte are not 0)
103: Bad compressed file (EOF detected)
104: Bad compressed file (bad CRC detected)
105: Bad compressed file (original size and
decompressed size mismatch detected)
-2: Reached the end of the file being
decompressed
-3: Bad compressed file data
-4: Failed to secure memory for decompression
-5: No space in output buffer
Solution:
The file system is not stored on the flash ROM
correctly.
Contact our technical support.
Failed to decompress the self-diagnostic program.
The number XXX is the error number (decimal).
100: Failed to secure heap buffer (1024 bytes of
work area for decompression could not be
secured)
101: Bad compressed file (bad magic header; the
first two bytes are not 0x1f, 0x8b)
102: Bad compressed file (bad magic header; the
third byte is not 0x8 or bits five to seven of
the fourth byte are not 0)
103: Bad compressed file (EOF detected)
104: Bad compressed file (bad CRC detected)
105: Bad compressed file (original size and
decompressed size mismatch detected)
-2: Reached the end of the file being
decompressed
-3: Bad compressed file data
-4: Failed to secure memory for decompression
-5: No space in output buffer
Solution:
The self-diagnostic program is not stored on the flash
ROM correctly.
Contact our technical support.
SERVIS IP-Serial
1p Converter
User's Guide
7
157

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx-3001srf

Table of Contents