Table of Contents
Advertisement
Ejecting the CF card
Perform the following steps to eject a CF card that has been recognized.
1.
Press the CF/Init button using an object such as a pen.
2
2.
Once the STATUS LED changes from orange to green, the CF card is ready to
be ejected. Press the Eject button and remove the CF card.
Inserting a formatted CF card
Perform the following steps to insert and recognize a CF card that has already been
formatted using the cfformat command.
1.
Insert the CF card into the CompactFlash slot, and then press the CF/Init button
using an object such as a pen.
2.
When the STATUS LED blinks green and then becomes solid green, it has
been recognized.
When inserting the CF card, be sure to push it in all the way.
SERVIS IP-Serial
20
1p Converter
User's Guide
CF/Init button
Eject button
Advertisement
Table of Contents
