Readflash Command - Fujitsu FX-3001SR User Manual

4.1.24
Overview
Syntax
Parameter(s)
4
Password required?
SERVIS IP-Serial
78
1p Converter
User's Guide

readflash Command

Writes flash ROM files to CF or NFS.
readflash <filepath>
filepath = Specifies the full path (destination + filename).
The following are the files that can be saved.
List of files
File name
ntp.conf
localtime
portmng.cf
hosts
port.conf
ifconfig.sm0
users
rc.conf
passwd
master.passwd
group
services
snmpd.conf
Example (from the local console)
Saves the ntp.conf file to /CF/conf1.
$ readflash /CF/conf1/ntp.conf
$
Content
NTP config file
Time zone symbolic file
Configuration definition file
Host name definition file
Serial port config file
Network card config file
User config file
Network config file
Password file
Password master file
Group config file
Network service/port config file
Snmpd config file
No
Enter