Table of Contents
Advertisement
(3) Status LED
The status of the device is represented by the color and light status (on or
blinking). The following explains in more detail.
LED
Green
ON
Normal running
Blinking
Booting
CF mounting
OFF
The power is turned off
Gradation
Recovery in progress (green/red/orange gradation)
(4) Init button (displayed as CF/Init for advanced version)
Executing a recovery
By turning on the power or pressing the RESET button while pressing the Init
button, the recovery process to restore the default settings is executed.
Refer to
7.3 Recovery (Returning to Factory Settings) (page 182)
Advanced version only
CompactFlash control
This is used to control the insert/eject of the CompactFlash (hereafter, CF).
Mounting a CF card
(1) Insert the CF card into the CF slot.
(2) Press the Init button.
(3) When the LED changes from blinking green to solid green, the CF card
is available.
Ejecting a CF card
(1) Ensuring that the CF card is not being accessed, press the CF/Init
button.
(2) When the LED changes from blinking orange to solid green, the CF
card can be pulled out.
(3) Pull the CF card out.
(5) RESET button
This restarts the device.
Pressing this while the product is running resets the CPU.
Advanced version only
(6) CompactFlash slot
The slot for the CF media, which is used for storing log files and configuration
files.
Only Type-1 CF cards are supported; Type-2 CF cards such as HDD types are
not supported. Any commercially available CF card of any size may be used.
We provide optional CF cards in various sizes.
Refer to
6.3 Optional Accessories (page 153)
Red
Orange
Error detected
-
At shift to boot from
Writing in ROM
shutdown
CF unmounting
SERVIS IP-Serial
1p Converter
User's Guide
1
3
Advertisement
Table of Contents
