Setting Commands; Add Partition - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2

Setting Commands

The information setting commands are as follows:

2.2.1 add partition

2.2.2 clear access_control
2.2.3 clear ssh_key
2.2.4 console
2.2.5 download ssh_key
2.2.6 power off
2.2.7 power on
2.2.8 sadump
2.2.9 reset
2.2.10 nmi
2.2.11 remove partition
2.2.12 set active_mmb
2.2.13 set date
2.2.14 set partition dynamic_reconfiguration
2.2.15 set gateway
2.2.16 set gateway_ipv6
2.2.17 set hostname
2.2.18 set http
2.2.19 set http_port
2.2.20 set https
2.2.21 set https_port
2.2.22 set ip
2.2.23 set ipv6
2.2.24 set maintenance_ip
2.2.25 set partition home
2.2.26 set partition lan_device_mode
2.2.27 set partition memory_mirror_ras_mode
2.2.28 set partition memory_opration_mode
2.2.29 set partition name
2.2.30 set partition pci_address_mode
2.2.31 set ssh
2.2.32 set ssh_port
2.2.33 set telnet
2.2.34 set telnet_port
2.2.35 set timezone
2.2.36 hotadd partition
2.2.37 hotremove partition
This section describes how to use these commands.
2.2.1 add partition
Adds specified SB, IOU in specified partition.
If specified SB, IOU are not in free status, they cannot be executed.

Privilege: Administrator
(1) Input format
add partition < partition#> SB <SB#x> {quiet}
add partition < partition#> IOU <IOU#x> {quiet}
(2) Option
quiet: Executes the command without interacting with user.