Setting Up The Floorstand Model - Fujitsu PRIMERGY TX300 Operating Manual

Hardware Installation
4.3

Setting Up the Floorstand Model

I
If no floorstand model is to be installed continue with section
"Installing/Removing the Rack Model into the Rack" on page 29:
V
CAUTION!
Please note the safety instructions in chapter "Important Notes" on page 13.
Ê Transport the server to the place where you want to set it up.
Ê Unpack the server (see section "Unpacking the Server" on page 26).
Mounting HDD cover
Figure 2:
A26361-K881-Z102-4-7619
Setting Up the Floorstand Model
2
1
4
3
3
27