Partition Configuration] Menu; Table 1.67 [Ipv6 Console Redirection Setup] Window Buttons - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
Buttons
Auto When you Click [Auto] button IP address and prefix length is automatically displayed.
Apply When you click the [Apply] button, video direction of the specified partition, virtual media setting
is applied.
Cancel When you click the [Cancel] button, virtual media setting, video redirection is not applied and it
returns to the original state.
(1) Menu Operation
[Partition] - [Console Redirection Setup] - [IPv6 Console Redirection Setup]
(2) Window Operations
1. Input the IP address, prefix length and sets whether video redirection and virtual media should be used.
2. Click the [Apply] button.
[Message]
This section describes the messages to be displayed on this window.
Message Number
W_00432
W_00433
I_00539

1.3.4 [Partition Configuration] Menu

The SB and IOU which configure the partition can be set on [Partition Configuration] window.
In case of PRIMEQUEST 2400E model, only 0 and 1 are displayed for partition.

TABLE 1.67 [IPv6 Console redirection Setup] Window Buttons

Invalid IP Address specified
The duplicate IP address was found.
The settings for the Console Redirection IP are changed. All existing network
connections about this settings will be lost. You will need to login again. If you want to
continue, please click OK button. If not, click Cancel button. Are you sure?
Description
Message