Netck; Netck Stat - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB CLI (Command Line Interface) Operations
2.3.35 netck ifconfig
Displays the setting status of (IPv4 or IPv6) network environment.
Privilege: Aｌｌ
(1)
Input format
netck ifconfig
(2)
Option
None
(3)
Usage example
#netck ifconfig
bond0 Link encap:Ethernet HWaddr 00:17:42:9B:D9:78
inet addr:10.24.77.80 Bcast:10.24.77.255 Mask:255.255.255.0
inet6 addr:2001:2345::10/64 Scope: Global
inet6 addr:fe80::217:42ff:fe9b:d978/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:4765 errors:0 dropped:0 overruns:0 frame:0
TX packets:3438 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:637685 (622.7 KiB) TX bytes:1318710 (1.2 MiB)
#
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
(5)
Process
Executes "ifconfig bond0"
2.3.36 netck stat
Displays the list of the port number which is used by the process during operation.
Privilege: Aｌｌ
(1)
Input format
netck stat
(2)
Option
None
(3)
Usage example
#netck stat
Active Internet connections (w/o servers)
Proto
tcp
#
(4)
Message
Recv-Q Send-Q Local Address
0
0
PRIME123063:telnet
Foreign Address
10.1.2.3:4015
State
TIME_WAIT
Advertisement
Table of Contents
