Fujitsu PRIMEQUEST 2000 Series Tool Reference page 162
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB Web-UI (Web User Interface) Operations
Items
TPM
(ownership)
On board LAN Mode
IOU
On board LAN Mode
(current status)
On board LAN Mode
(setting)
(1)
Menu Operation
[Partition] - [Partition#x] - [Mode]
(2)
Window Operations
1.
Specify respective Mode and click the [Apply] button.
Confirmation dialog box is displayed.
2.
Click the [Ok] button.
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00089
Mode setting failed.
E_00090
Power Control [Reset] setting failed.
E_00461
Unable to register the specified Partition#%s as Mode enable because the DIMM
does not satisfy requirements of Mode.
W_00487
Unable to change the mode, because this partition is powered on.
E_00497
Unable to register the specified Partition#%s as Mode enable because the CPU
mismatch between SBs.
E_00498
Unable to register the specified Partition#%s as Mode enable because the
unsupported CPU configuration.
E_00499
Unable to register the specified Partition#%s as Mode enable because of abnormal
CPU composition.
E_00500
Unable to register the specified Partition#%s as Mode enable because of abnormal
DIMM composition.
Activated
Deactivated
Remarks
When Home SB of partition is 'without TPM mode', this field is not displayed.
Displays ownership of TPM.
Yes (having Ownership)
No (not having Ownership)
Remarks
When Home SB of partition is without TPM mode, this field is not displayed.
Displays the IOU that belongs to the partition.
Displays the On board LAN Mode in IOU Unit.
Enabled (WOL enabled): Onboard LAN can be used at AC On status.
Enabled (WOL disabled): Onboard LAN comprised in the partition can be
used at Power On status.
Disabled: Onboard LAN cannot be used every time.
Sets On board LAN Device Mode in IOU Unit.
Select the Mode to be set by using the radio button.
Enabled(WOL enabled)
Enabled(WOL disabled)
Disabled
Default setting is Enabled (WOL disabled).
On board LAN Mode is displayed only at the PPAR Partition (Partition #0~3).
Please start Partition once, and reflect the setting of WOL when you assume
the Enabled(WOL enabled) On board LAN Mode again after the setting is
changed to Disable or Enabled(WOL disabled).
Description
Message
Advertisement
Table of Contents
