Figure 3.50 Change Of The Priority Level (Set Legacy Floppy Drive Order) (4) - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
UEFI Menu Operations
5. Set Enable/Disable of the Floppy Drive #N.
Select "Disable" to disable.
Select the boot option to enable.
"FIGURE 3.50 Change of the priority level (Set Legacy Floppy Drive Order)
(4)" is an example of the window
in which Floppy Drive # 00 is set to Disable.
Disabled Floppy Drive #N is displayed as "Disable".
FIGURE 3.50 Change of the priority level (Set Legacy Floppy Drive Order) (4)
6. To exit from this menu by saving changes in the setting, select [Commit Changes and Exit] and press
[Enter] key. To exit from this menu without saving changes in the setting, select [Discard Changes and Exit]
and press [Enter] key.
[Set Legacy Hard Disk Order] Menu
[Set Legacy Hard Disk Order] menu sets the HDD to be activated in the legacy operating system.
The window at the time of activation of [Set Legacy Hard Disk Order] menu is as shown below.
HDD information is displayed in this window. The HardDisk Drive is activated from #00. Moreover, when
"Disable" is displayed in #N of the HardDisk Drive, the boot function of HardDisk Drive #N is shown to be
Disabled.
Advertisement
Table of Contents
