Show Partition Pci_Address_Mode; Show Timezone - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
Failed to execute %s command.
Failed to execute show partition command.
Partition#x is not defined.

2.3.12 show partition pci_address_mode

Displays the PCI Address Mode of the specified partition.

Privilege: Aｌｌ
(1) Input format
show partition pci_address_mode <partition#>
(2) Option
None
(3) Usage example

Example: When PCI Address Mode of partition#3 is displayed
#show partition pci_address_mode 3
current: bus
setting: segment
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute %s command.
Failed to execute show partition command.
Partition#x is not defined.

2.3.13 show timezone

Displays timezone.

Privilege: Aｌｌ
(1) Input format
show timezone
(2) Option
None
(3) Usage example
#show timezone
Timezone is set to Asia/Tokyo
#