MMB CLI (Command Line Interface) Operations
The specified parameter is invalid.
Unable to execute this command under maintenance.
2.6.13 add user
The user account is newly registered.
Privilege: Administrator
(1)
Input format
add user <user name> <password> < confirm password> [admin | operator | user | ce] {quiet}
(2)
Option
user name
password
confirm password
privilege
Quiet
(3)
Usage example
Example: In case of admin authority.
add user Aaaaaaaa Bbbbbbbb Bbbbbbbb admin
#
Example: In case of
add user Aaaaaaaa Bbbbbbbb Bbbbbbbb operator
#
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
No more User addition
Same name already exists. User addition failed.
2.6.14 show user_list
User account information registered in the system is displayed.
Privilege: Administrator
(1)
Input format
: Sets the user name.
You can enter a total of 8 to 32 characters.
You can enter the following characters in a user name:
[0-9], [a-z], [A-Z], - (hyphen), _ (underscore).
However, the first character of the user name must be a letter from a to z or A to Z.
: Sets the password.
You can enter a total of 8 to 32 characters.
You can specify the following characters in a password:
[0-9], [a-z], [A-Z], and
special characters: ! " # $ % & ' ( ) = - ^ ~ ¥ @ `[/ ] { } : * ; + ? < . > , _ |
: Used to reenter a password for confirmation.
: Sets the privileges of the user account.
You can specify either admin, operator, user or ce.
: The command is executed without interactive operation with the user.
operator
authority.