Clear Ssh_Key; Console - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
Unable to execute this command on a standby MMB.
The specified parameter is invalid.

2.2.3 clear ssh_key

Clears the public key used for the SSH Public Key Authentication which is registered for the logged in user.

Privilege: User
(1) Input format
clear ssh_key
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
Unable to execute this command on a standby MMB.
The specified parameter is invalid.

2.2.4 console

Login to the specified partition by telnet. Execute the Text Console connection of BMC.
The Text Console connection to BMC can be connected only by one command per BMC. However, the
following messages are displayed when the following console command is executed when other users have
already executed the console command, and the Text Console connection to BMC can be done compulsorily
by inputting as 'Y'. In that case, the compulsion cutting is done as for the console command under the
connection.
Console redirection already in use
If needed, the current user can be disconnected
Do you really want to force disconnect current user? [Y|N]:

Privilege: Administrator, Operator, Partition Operator (Partitions targeted for
management only), CE
(1) Input format