Fujitsu PRIMEQUEST 2000 Series Tool Reference page 148

MMB Web-UI (Web User Interface) Operations
When Add is instructed for a Partition in which operating system has already operated, and when the
operating system supports Hot-add, SB/IOU added during operating system operation executed by Hot-add
can be used.
(1) Menu Operation
[Partition] - [Partition Configuration] - [Add Unit] button
(2) Window Operations
1. Select the SB or IOU to be incorporated in the partition, and then click the [Apply] button.
A confirmation dialog box appears.
2. Click [OK] button.
The SB or IOU will be incorporated.
3. Click the [Apply] or [Cancel] button.
Return to [Partition Configuration] window.
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00045 Free node doesn't exist.
E_00112 Unable to add the specified SB#%aa to the partition due to CPU mismatch between
SBs.
E_00424 Unable to add the specified SB to the partition due to CPU composition abnormal.
E_00425 Unable to add the specified SB to the partition due to DIMM composition abnormal.
E_00490 Unable to add the specified SB to the partition due to DIMM does not satisfy
requirements of Mode.
W_00505 Unable to set configuration because the power on/off is processing. Please execute it
after a while again.
E_00519 Unable to add the specified SB to the partition due to SB composition abnormal.
E_00524 Unable to add the specified SB to the partition due to VRM composition abnormal.
For details on the messages displayed on the window, see
(C122-E178EN).
When multiple errors are detected, multiple errors are displayed in the dialog box.
[Remove SB/IOU from Partition] Window
Select the partition by using radio button of [Partition Configuration] window, and when [Remove] button is
clicked, [Remove SB/ IOU from Partition] window appears.
Message
PRIMEQUEST 2000 Series Message Reference