Fujitsu PRIMEQUEST 2000 Series Tool Reference page 307

MMB CLI (Command Line Interface) Operations
If you register this partition as a Mode,
Mode will be disabled when switching to Reserved SB.
Are you sure to continue?[Y/N]"
For the partition which is already powered OFF, when the settings are changed by this command, power
OFF/ON is not required. The value which is set is reflected instantly instead of displaying the above-
mentioned message.
Moreover, also when the values which are the same as the current values are set, power off/on is not
required and the above-mentioned message is not displayed.

Privilege: Administrator, Operator, Partition Operator (Only managed partition)
(1) Input format
set partition memory_operation_mode <partition#> [performance |normal | partial_mirror | spare] {quiet}
(2) Option
quiet: The command is executed without interactive operation to User.
(3) Usage example
Example: When setting Memory Operation Mode of the Partition3 to performance
# set partition memory_operation_mode 3 performance
The setting will become effective the next time the partition power off/on is performed
#
here are cases when the partition is configured to 1SB, and, when Reserved SB is set, also when the
settings other than the Memory Operation Mode of DIMM configuration satisfying SB requirement is
registered as Reserved SB, a dialog box for conformation is displayed.
When the Memory Operation Mode is switched to the Reserved SB, a warning message indicating a
change in Memory Operation Mode is displayed in the dialog box and whether this setting is to be
continued is confirmed in the dialog box.
If this message is not displayed, the Memory Operation Mode is not changed even if it is switched to
Reserved SB.
Example: When setting the Mode of the Partition 1 to enable
(The SB with DIMM that does not satisfy the Mode requirements is registered as the Reserved SB in
Partition 1)
# set partition memory_operation_mode 1 pertial_mirror
The SB with DIMM that does not satisfy requirements of Mode is registered as the Reserved SB.
If you register this partition as a Mode,
Mode will be disabled when switching to a Reserved SB.
Are you sure to continue? [Y/N] y
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The setting will become effective the next time the partition power off/on is performed.
Are you sure to continue? [Y/N]
The SB with DIMM that does not satisfy requirements of Mode is registered as a Reserved SB. If you
register this partition as a Mode, Mode will be disabled when switching to Reserved SB.
Are you sure to continue? [Y/N]
The specified partition number is invalid.
The specified parameter is invalid.
Unable to register the specified Partition#%d as Mode enable because the CPU mismatch between SBs.
Unable to register the specified Partition#%d as Mode enable because the DIMM does not satisfy