Create A Dump Device] Menu; Figure 6.8 Dump Device Create Menu; Table 6.6 Displayed Contents Of The Help Display Area For Operation; Table 6.7 Displayed Contents Of Menu Selection Area - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Setting of sadump environment

TABLE 6.6 Displayed contents of the help display area for operation

Item
↑↓=Move Highlight
<Enter>=Select Entry
Note
Don't operate [F2] key. [Esc] key is displayed on the screen but don't operate it.
6.5

[Create a dump device] Menu

This is displayed when the [Create a dump device] menu is selected in the main menu.
Specify operation, creating dump device or selecting created dump device.
Item
Create mode
Disk selection
Exit
Moves the cursor up or down
Selects an entry.
Dump device create menu
FIGURE 6.8

TABLE 6.7 Displayed contents of menu selection area

Select create mode of dump device.
Single： Create with single disk or single partition. To
set up for redundancy, select [Single] and then
configure multiple sadump devices.
Multiple: Create with multiple disks. Use this when
system memory is large and one disk is insufficient.
The default is [Single].
Go to dump device select menu
Exits this menu.
Description
Description