Figure 1.37 [Disk Enclosure#X] Window (2); Table 1.55 Display And Setting Items Of [Disk Enclosure#X] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations

FIGURE 1.37 [Disk Enclosure#x] Window (2)

When System Progress of the partition is EFI, Boot, and OS Running, various information on RAID Card,
Physical Drives, Logical Drives, and the Action Progress table is displayed. (*1)
(*1) After System Progress is changed into the state of EFI, Boot, and OS Running until information is
correctly displayed, it takes one minute or less.

TABLE 1.55 Display and Setting items of [Disk Enclosure#x] Window

Items
Disk Enclosure Information
Status
Location
Location LED
Status
Temperature
Threshold
Displays the status of the Disk Enclosure.

OK

Warning

Failed
Displays the location where Disk Enclosure is connected.
Displays the status of the Location LED.
Following are the various display status.

On: Lighting

Off: Light out
On/ Off of the Location LED can be controlled by clicking the [On], [Off] buttons.
Displays the status of each temperature sensor.
·
OK
·
Not-present
·
Warning
·
Critical
Displays the temperature of each temperature sensor.
Displays the threshold which maintained the by each temperature sensor.
·
Warning: Low/High
Description