Figure 1.48 [Remove Sb/Iou From Partition] Window; Table 1.71 Display Items And Set Items Of [Remove Sb/Iou To Partition] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations

FIGURE 1.48 [Remove SB/IOU from Partition] Window

When maintenance mode (Hot Partition Maintenance, Warm System Maintenance, or Cold System
Maintenance) is set, only the user (Maintenance person, Administrator privilege) who sets the maintenance
mode can operate this mode.
If the partition is selected other than the maintenance target, message is displayed and operation is not
possible.

TABLE 1.71 Display Items and Set Items of [Remove SB/IOU to partition] Window

Items
SB
Status
Number of CPUs
Memory
IOU
Status
Number of PCI-Express slots
"DR"
When Remove is instructed for a Partition where the operating system is already running, and if operating
system supports Hot-remove, the SB/IOU is removed from the concerned partition though the operation
system is running state. Then SB/IOU is in Free status.
(1) Menu Operation
[Partition] - [Partition Configuration] - [Remove Unit] button
(2) Window Operations
1. Select the SB or IOU which is to be removed from the partition and click the [Apply] button.
Confirmation dialog box is displayed.
2. Click [OK] button.
SB or IOU is removed.
3. Click the [Apply] or [Cancel] button.
Displays SB which belongs to partition
Displays the status of SB.
Displays the number of CPUs mounted on the SB.
Displays the amount of memory mounted on the SB.
Displays the IOU which belongs to the partition.
Displays the status of the IOU
Displays the number of PCI-Express of the IOU.
Description