Primequest2800B Model Commands; Primequest2800B Model Cli Command List - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.6

PRIMEQUEST2800B model Commands

2.6.1 PRIMEQUEST2800B model CLI command list

This chapter describes the functions of the PRIMEQUEST2800B model CLI commands. Follow Chapter 2.5
from Chapter 2.2 about the part not described in this chapter.
The following tables list the account privileges required for individual commands.
"Permitted" in an account privilege column indicates the command can be used with those account privileges.
- TABLE 2.9 MMB CLI commands (Administrator)
- TABLE 2.10 MMB CLI commands (Operator)
- TABLE 2.11 MMB CLI commands (User)
- TABLE 2.12 MMB CLI commands (CE)
Power control
power off
power on
Partition creation
add partition
remove partition
show partition configuration
set reserved_sb
show reserved_sb
set partition home
show partition home
set partition dynamic_reconfiguration
show partition dynamic_reconfiguration
set memory_operation_mode
show memory_operation_mode
set memory_mirror_ras_mode
show memory_mirror_ras_mode
set pci_address_mode
show pci_address_mode
set lan_device_mode
show lan_device_mode
set pci_express_mode
show pci_express_mode
set partition name
show partition name
hotadd partition
hotremove partition
Partition control
sadump
reset
nmi
Partition connection
TABLE 2.9 MMB CLI commands (Administrator)
Command Administrator
Permitted Turns the power off.
Permitted Turns the power on.
- Adds a partition component.
- Removes a partition component.
- Displays the partition configuration.
- Sets the Reserved SB.
- Displays the Reserved SB.
- Sets the Home SB.
- Displays the Home SB.
- Sets DR state of partition.
- Displays DR state of partition.
Permitted Sets Memory operation mode.
Permitted Displays Memory operation mode.
Permitted Sets Memory operation at Mode.
Permitted Displays Memory operation at Mode.
- Sets PCI bus number allocation mod.
- Displays PCI bus number allocation mod.
Permitted Sets LAN device mode.
Permitted Displays LAN device mode.
- Sets PCI-express mode.
- Displays PCI-express mode.
- Sets the partition name.
- Displays the partition name.
- Dynamic Reconfiguration HotAdd
- Dynamic Reconfiguration HotRemove
- sadump instruction
Permitted Hard Reset instruction
Permitted NMI interrupt instruction
Outline