Appendix A List of Setting Items
Setting
items
Enable
In case of Edit User:
current status.
Full Name
None
Operable
None
Partition (for
Partition
Operator)
A.1.17
Setting Items of [Date/Time] Window
The following table lists the initial value and the value that can be set for the setting items of [Date/Time]
Window.
Setting Item
Date
Shows time on the clock of
the server.
Time
Shows time on the clock of
the server.
Time Zone
None
NTP
Disable
NTP Time
Step
Correction
Mode
NTP Server
None
1
NTP Server
None
2
NTP Server
None
3
Initial value
Disabled
Maximum 32 characters can
be entered.
On: Operational
Off: Non-operational
TABLE A.17 Setting Items of [Date/Time] Window
Initial Value
YYYY-MM-DD
YYYY: Year
MM: Month
DD: Day
Modify the Time is On:
Time is set
Hour:Minute:Second:24
hours format
Modify the Time is Off:
Time is not set.
Select from pull down menu.
Enable
Disable
Step
Slew
In case of IPv4
0-255, 0-255, 0-255, 0-255
In case of IPv6
0-FFFF, 0-FFFF, 0-FFFF,
0-FFFF, 0-FFFF, 0-FFFF,
0-FFFF, 0-FFFF
In case of IPv4
0-255, 0-255, 0-255, 0-255
In case of IPv6
0-FFFF, 0-FFFF, 0-FFFF,
0-FFFF, 0-FFFF, 0-FFFF,
0-FFFF, 0-FFFF
In case of IPv4
0-255, 0-255, 0-255, 0-255
In case of IPv6
0-FFFF, 0-FFFF, 0-FFFF,
0-FFFF, 0-FFFF, 0-FFFF,
0-FFFF, 0-FFFF
Value that can be set
Value that can be set
Remarks
Grayed out if privilege is
other than partition
operator.
Remarks
It can be set only when
NTP is Enabled.
It can be set only when
NTP is Enabled.
It can be set only when
NTP is Enabled.