Table 1.72 Display Items And Set Items Of [Reserved Sb Configuration] Window; Table 1.73 [Reserved Sb Configuration] Window Buttons - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
The Reserved SB cannot be set when TPM function is used for the Home SB.
The Reserved SB cannot be set though Fixed I/O Mode is specified in the Partition.
When mounting conditions are not fulfilled, a message is displayed and Reserved SB cannot be set.
For a partition that is set to Mode, if you attempt to set an SB with a DIMM configuration that does not satisfy
the Mode requirements as a Reserved SB for a partition that is set to Mode, a confirmation dialog box
appears. A warning message stating that Mode is cancelled while shifting to Reserved SB is displayed in the
dialog box for confirmation and whether to continue with the Reserved SB settings is confirmed.
When several Reserved SBs are registered in one Partition, they operate as Reserved SBs in ascending
order of SB number.

TABLE 1.72 Display Items and Set Items of [Reserved SB Configuration] Window

Items
#
Partition Name
Power Status
Mode (setting)
SB

TABLE 1.73 [Reserved SB Configuration] Window Buttons

Buttons
Apply If "[Apply]" button is clicked, it is defined as Reserved SB.
Cancel If "[Cancel]" button is clicked, it returns to the original state without being defined as a Reserved
SB.
(1) Menu Operation
[Partition] - [Reserved SB Configuration]
(2) Window Operations
1. The check box of Partition intended for Reserved SB is set to ON.
2. Click the [Apply] button.
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00098 Failed to get the Replacement Condition
E_00100 Failed to set the Replacement Condition
E_00113 Unable to register the specified SB#%aa as a Reserved SB due to CPU mismatch
between SBs.
E_00114 The specified SB#%aa cannot be registered as a Reserved SB.
I_00223 Unable to change the specified SB(s) because the partition including the specified
SB(s) is under maintenance.
E_00419 Unable to register the specified SB#%s as a Reserved SB due to unsupported CPU
configuration.
E_00420 Unable to register the specified SB#%s as a Reserved SB because the DIMM does
not satisfy requirements of Mode.
Displays number that identifies the Partition.

Reserved: Reserved SB

Free: Free SB
Displays name given to Partition.
Displays the power status of the partition

On

Standby
Displays the setting value of Mode corresponding to the Partition.

Enable: Mode is set

Disable: Mode is not set
Displays the Partition to which the SB belongs.
The check box to register the SB as a Reserved SB in the Partition of the
corresponding line is displayed in the cell which corresponds to Reserved SB or
Free SB.
Description
Description
Message