Leds] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Hide thumbs Also See for PRIMEQUEST 2000 Series:
Table of Contents

Advertisement

MMB Web-UI (Web User Interface) Operations
This section describes the messages to be displayed on this window.
Message Number
I_00013
E_00069
E_00077
E_00078
E_00100
E_00101
E_00107
E_00108
E_00109
I_00212
E_00422
E_00482
E_00491
E_00517
W_00587
W_00588
For details on the messages displayed on the window, see
(C122-E178EN).
In case of multiple errors, 'multiple errors' message appears in the warning dialogue box.

1.2.9 [LEDs] window

[LEDs] window displays the status of the LED in the system.
Setting completed.
Can't control system power under maintenance. Release maintenance mode.
Partition#xx cannot execute Power On.
Partition#xx cannot execute Power Off.
Failed to set the System Power Control
Unable to power on the partition#%aa due to CPU mismatch between SBs.
Unable to power on the chassis.
Unable to power off the chassis.
Unable to force power off.
System Power Control cannot be executed because the system is under
maintenance.
Unable to power on the partition#%aa due to CPU composition abnormal.
Unable to power on the partition#%aa due to DIMM composition abnormal.
Unable to power on the partition#%aa due to DIMM does not satisfy requirements of
Mode.
Unable to power on the partition#%d due to abnormal SB composition.
Unable to execute Power Control because the firmware is updating.
Unable to execute command because the power control operating.
Message
PRIMEQUEST 2000 Series Message Reference

Advertisement

Table of Contents
loading

Table of Contents