Power Management Setup] Window; Figure 1.51 [Power Management Setup] Window; Table 1.74 Display Items And Set Items Of [Power Management Setup] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
Message Number
E_00421
E_00460
W_00481
W_00492
W_00493
I_00494
W_00520
For details on the messages displayed on the window, see
(C122-E178EN).
When multiple errors are detected, multiple errors are displayed in the dialogue box.

1.3.6 [Power Management Setup] Window

In the [Power Management Setup] window, Power Saving can be set in the partition unit.
Power Saving can be set only when the Power save Control as system is Enable.
When the System Power Save setting is Disable, then the display of this screen is shown as gray and
cannot be set.

TABLE 1.74 Display Items and Set Items of [Power Management Setup] Window

Items
No change.
Unable to set the specified SB to the partition due to CPU composition abnormal.
Unable to register the specified SB#%s as a Reserved SB due to the home SB is
TPM enabled.
Unable to register the specified SB#%d as a Reserved SB due to Partition is Fixed
I/O Mode.
Unable to register the specified SB#%d as a Reserved SB due to abnormal DIMM
composition.
The DIMM does not satisfy requirements of Mode.
If you register the specified SB%s as a Reserved SB, Mode will be disabled when
switching to specified SB.
Are you sure to continue?
Unable to register the specified SB#%d as a Reserved SB due to abnormal SB
composition.

FIGURE 1.51 [Power Management Setup] window

Message
PRIMEQUEST 2000 Series Message Reference
Description