Show Lan_Device_Mode; Set Mmbcontrol Reset - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations

2.6.11 show lan_device_mode

Displays the setting (enable/disable) of LAN Device/WOL in IOU unit of the system.

Privilege: Aｌｌ
(1) Input format
show lan_devoce_mode
(2) Option
None
(3) Usage example

Example: When LAN Device Mode of IOU (In example it is IOU#2 or IOU#3) from system is displayed
#show lan_device_mode
iou#2: LAN Device: enable WOL: enable
iou#3:LAN Device: disable WOL: disable
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
Failed to execute %s command.
Failed to execute show lan_device_mode command.
System Configuration Failed.

2.6.12 set mmbcontrol reset

Specify the MMB reset.
This command execution is controlled at the time of the maintenance mode.

Privilege: Administrator
(1) Input format
set mmbcontrol reset {quiet}
(2) Option
quiet: The command is executed without interactive operation with the user.
(3) Usage example
set mmbcontrol reset
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).