Table 1.20 [System Events Log Filtering Condition] Window Buttons - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
Items
Source
Unit
Sort by Date/ Time
Start Date/ Time
End Date/ Time
Number of events to display

TABLE 1.20 [System Events Log Filtering Condition] Window Buttons

Buttons
Apply Log which matches with the specified conditions will be listed on [System Event Log]
window by clicking the [Apply] button.
Cancel Returns to [System Event Log] window by clicking the [Cancel] button.
Default Setting Selected value returns to the default value.
[Message]
This section describes the messages to be displayed on this window.
Message Number
W_00413 Nothing is selected.
W_00414 Invalid Date Format.
W_00426 Invalid Values Specified.
W_00434 Invalid Time Format.
W_00441 Range over error.
I_00417 Are you sure?
I_00468 Are you sure you want to clear the SEL?
CPU.
Select target source to be displayed.
Select [All] or [Specified] by Radio button.
·
All: Filtering is not done by Source.
·
Specified: Filtering of Source unit can be set. Select the Source to be
displayed.
Default setting is All.
Select the target unit to be displayed.
Select [All] or [Specified] by Radio button.
·
All: Filtering is not done by Unit.
·
Specified: Filtering of Unit can be set. Select the Source to be
displayed.
Default setting is All.
Specifies either display by new order or display by old order by using the
radio button.
·
New event first
·
Old event first
The default setting is New event first.
Specifies either display from recent event or specify the time, by using the
radio button.
·
First event: Display by recent event
·
Specified Time: Specify the time. In case of Specified Time, enter the
Start Date and Time.
The default setting is First event.
Specifies either display till last event or specify the time, by using the radio
button.
·
Last event: Display till Last event
·
Specified Time: Specify the time. In case of Specified Time, enter the
End Date and Time.
The default setting is Last event.
Specifies the number of log to be displayed. As for the denominator, display
the total number of events that are logged.
A maximum of 3000 events can be specified.
The default setting is 100 events.
Message
Description
Description