Setting of sadump environment
TABLE 6.4 Displayed contents of the help display area for operation
Item
↑↓=Move Highlight
<Enter>=Select Entry
Note
Don't operate [F2] key. [Esc] key is displayed on the screen but don't operate it.
6.4
[Dump device Manager] Menu
This is displayed when the [Dump device Manager] menu is selected in the main menu.
In this menu, you can create, setup, discard dump device.
Item
Display area
Create a dump device
Select a dump device
Discard a dump device
Exit
Moves the cursor up or down
Selects an entry.
In the case of ENABLE, COMPRESS, RECYCLE,
selection item is shown as pop-up window.
In the case of REBOOT, you can input a value.
Specify a value, and commit it by [Enter] key.
FIGURE 6.7 Dump device maintenance menu
TABLE 6.5 Displayed contents of menu selection area
Displays the number of dump devices which are
already created, and displays the number of dump
devices which are already set up.
Go to dump device create menu.
Go to dump device setup menu.
Go to dump device discard menu.
Exits this menu
Description
Description