Displaying And Maintaining Qos Policies - H3C S5820X Series Configuration Manual

Acl and qos
Hide thumbs Also See for S5820X Series:
Table of Contents

Advertisement

Follow these steps to apply the QoS policy to the control plane:
To do...
Enter system view
Enter control plane view
Apply the QoS policy to the
control plane
CAUTION:
By default, some devices are configured with pre-defined control plane policies, which take effect on the
control planes by default. A pre-defined control plane QoS policy uses the system-index to identify the
type of packets sent to the control plane. You can reference system-indexes in if-match commands in
class view for traffic classification and then re-configure traffic behaviors for these classes as required.
You can use the display qos policy control-plane pre-defined command to display them.
In a QoS policy for control planes, if a system index classifier is configured, the associated traffic
behavior can contain only the CAR or accounting action. In addition, if the CAR action is configured,
only its CIR setting can be applied.
In the QoS policy for a control plane, if a system index classifier is not configured, the associated traffic
behaviors also take effect on the data traffic of the card where the control plane resides.

Displaying and maintaining QoS policies

To do...
Display traffic class configuration
Display traffic behavior
configuration
Display user-defined QoS policy
configuration
Display QoS policy configuration
on the specified or all interfaces
Display VLAN QoS policy
configuration
Display information about QoS
policies applied globally
Display information about QoS
policies applied to a control plane
Use the command...
system-view
control-plane slot slot-number
qos apply policy policy-name inbound
Use the command...
display traffic classifier user-defined [ tcl-name ]
[ | { begin | exclude | include }
regular-expression ]
display traffic behavior user-defined
[ behavior-name ] [ | { begin | exclude |
include } regular-expression ]
display qos policy user-defined [ policy-name
[ classifier tcl-name ] ] [ | { begin | exclude |
include } regular-expression ]
display qos policy interface [ interface-type
interface-number ] [ inbound | outbound ] [ |
{ begin | exclude | include }
regular-expression ]
display qos vlan-policy { name policy-name |
vlan vlan-id } [ slot slot-number ] [ inbound |
outbound ] [ | { begin | exclude | include }
regular-expression ]
display qos policy global [ slot slot-number ]
[ inbound | outbound ] [ | { begin | exclude |
include } regular-expression ]
display qos policy control-plane [ slot
slot-number ] [ inbound ] [ | { begin | exclude |
include } regular-expression ]
26
Remarks
Required
Required
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view

Advertisement

Table of Contents
loading

This manual is also suitable for:

S5800 series

Table of Contents