CS9350 User's Guide
6.2.4
Cleaning the cleaning wiper
(1) Time for cleaning
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
(2) Cleaning procedures
NOTE
Use the cleaning stick to clean the cleaning wiper.
For details of the cleaning stick, refer to "8.3 Options/Supply list".
Step 1:
If the printer is turned ON, make sure the following.
•
Printing or other operations are not in progress.
•
The operation panel display is Normal.
Step 2:
Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
•
"Menu1: Setup>" is displayed on the operation panel.
•
The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
6-159