Using The Voice Recording - Yaesu FR5DR Operating Manual

Using the Voice Recording

With the voice recording function, the received audio of the other station, and/or the
transmit audio of the FT5DR/DE is recorded on the microSD memory card. The record-
ed file can be played back with FT5DR/DE or the microSD memory card can be taken
out and used on a PC.
Once recording is started, recording continues until recording is stopped, or the capacity
of the microSD card is full.
About the file
⿠The audio file is saved in the "VOICE" folder on the microSD card.
⿠The file format is a Wave sound format file (extension: wav).
⿠The file name is "YYMMDDmmhhss.wav" (YY: year, MM: month, DD: day, hh: hour,
mm: minute, ss: second) depending on the date and time when the recording started.
• When using the microSD memory card for the first time, please refer to "Formatting a
microSD Memory Card" on page 19 for formatting.
• Since the date and time information is used for file names and file timestamps, when using
the voice recording function, it is recommended to set the date and time of the transceiver
in advance by referring to "19 DATE & TIME ADJ" on page 65 It is recommended.
Recording the receive audio
1. Press the [F menu] key, and then touch [REC].
If [REC] is not displayed, touch [BACK
[REC] and then touch it.
• The display will indicate "RECSTART" and recording
will begin.
• During recording, "
the screen.
• With the factory default settings, the "A-band" re-
ceived audio is recorded.
• Recording will be paused about 3 seconds after the
squelch of the band that is recording is closed. Re-
cording will resume when a signal is received.
• The band or bands to be recorded, and whether or
not to include the transmit audio in the recording
may be selected in the Setup Menu.
Recording is stopped when the transceiver is turned OFF.
2. Press the [F menu] key, and then touch [REC STOP].
The recording will be stop.
56
" icon is displayed at the top of
] to display