Vox Operation; Setting Vox Function; Set The Vox (Automatic Voice Transmission) Delay Time - Yaesu FTM-500DR Operating Manual

VOX Operation

The VOX system provides automatic transmit/receive switching based on voice input to
the microphone or Bluetooth
to press the PTT switch in order to transmit, and it is not necessary to use a VOX head-
set in order to utilize VOX operation.

Setting VOX function

1. Press and hold the FUNC knob.
2. Rotate the FUNC knob to select "11 VOX", then press the FUNC knob .
3. Press the FUNC knob, and then rotate the FUNC knob to select "LOW" or "HIGH".
OFF:
VOX function OFF
LOW: VOX function ON (VOX Gain Levl "LOW")
HIGH: VOX function ON (VOX Gain Levl "HIGH")
4. Press the FUNC knob .
5. Press the [DISP] key to return to the normal operation.
z Disable the VOX function
To cancel VOX and return to PTT operation, just repeat the above procedures, se-
lecting "OFF" in step 3 above.

Set the VOX (automatic voice transmission) delay time

During transmission with VOX (automatic voice transmission) function, set the time to
stop speaking and return to reception.
1. Press and hold the FUNC knob.
2. Rotate the FUNC knob to select "11 VOX", then press the FUNC knob.
3. Rotate the FUNC knob to select "DELAY", then press the FUNC knob.
4. Rotate the FUNC knob to select the delay time (the transmit-receive delay after the
cessation of speech).
0.5s / 1.0s / 1.5s / 2.0s / 2.5s / 3.0s
5. Press the PTT switch to return to the normal operation.
20
®
Headset. With the VOX system enabled, you do not need