Proxim ORiNOCO AP-8000 User Manual page 119

Using CLI to Manage the Access Point
Configuring the Device Using CLI Commands
// QoS EDCA Table //
index 1.1 {
profile-name: Default
sta-cwmin: 15
sta-cwmax: 1023
sta-aifsn: 7
sta-txop: 0.0000
sta-acm: disable
ap-cwmin: 15
ap-cwmax: 1023
ap-aifsn: 7
aptxop: 0.0000
ap-acm: disable
}
index 1.2 {
profile-name: Default
sta-cwmin: 15
sta-cwmax: 1023
sta-aifsn: 3
sta-txop: 0.0000
sta-acm: disable
ap-cwmin: 15
ap-cwmax: 63
ap-aifsn: 3
aptxop: 0.0000
ap-acm: disable
}
index 1.3 {
profile-name: Default
sta-cwmin: 7
sta-cwmax: 15
sta-aifsn: 2
sta-txop: 3.0080
sta-acm: disable
ap-cwmin: 7
ap-cwmax: 15
ap-aifsn: 1
aptxop: 3.0080
ap-acm: disable
}
index 1.4 {
profile-name: Default
sta-cwmin: 3
sta-cwmax: 7
sta-aifsn: 2
sta-txop: 1.5040
sta-acm: disable
ap-cwmin: 3
ap-cwmax: 7
ap-aifsn: 1
aptxop: 1.5040
ap-acm: disable
}
Profile Table Configuration
Perform the following to configure Profile table parameters in QoS.
(config-dev<config>)# qos
AP-8000 User Guide
119