Proxim ORiNOCO AP-8000 User Manual page 130

Using CLI to Manage the Access Point
Configuring the Device Using CLI Commands
(config-dev<config>-filter)# tcpudp-filter
(config-dev<config>-filter-tcpudp)# ?
Possible completions:
port-filter-ctrl
tcpudp-table
(config-dev<config>-filter-tcpudp)# port-filter-ctrl enable
(config-dev<config>-filter-tcpudp)# tcpudp-table
(config-dev<config>-filter-tcpudp-tbl)# ?
Possible completions:
Exit
index
(config-dev<config>-filter-tcpudp-tbl)# index 8 ?
Possible completions:
<[Enter]> Execute this command
interface Tcp Udp Port Filter Interface
port-number Tcp Udp Port Filter Table Port Number
port-type Tcp Udp Port Filter Table Port Type
protocol-name Tcp Udp Port Filter Table Protocol Name
row-status Filter Table Row Status
(config-dev<config>-filter-tcpudp-tbl)# index 0 row-status 4
(config-dev<config>-filter-tcpudp-tbl)# index 0 interface 3
(config-dev<config>-filter-tcpudp-tbl)# index 0 port-type 3
(config-dev<config>-filter-tcpudp-tbl)# index 0 port-number 33
(config-dev<config>-filter-tcpudp-tbl)# index 0 protocol-name Test
Device-Name# show configure filtering tcp-udp-filter port-filter-ctrl
// RUNNING-CONFIGURATION //
// TCP UDP Filter Configuration //
tcp-udp-port-filter {
port-filter-control: disable;
}
Device-Name# show configure filtering tcp-udp-filter table
// RUNNING-CONFIGURATION //
// TCP UDP Port Filter Table //
index 1 {
protocol-name: NetBios Name Service
port-number: 137
port-type: both
interface: allInterfaces
row-status: notInService
}
index 2 {
protocol-name: NetBios Datagram Service
port-number: 138
port-type: both
interface: allInterfaces
row-status: notInService
}
index 3 {
protocol-name: NetBios Session Service
port-number: 139
port-type: both
interface: allInterfaces
Tcp Udp Port Filter Control
Tcp Udp Port Filter Table
Exit from configure mode
Tcp Udp Port Filter Table Index
AP-8000 User Guide
130