Installation and Initialization
In this chapter:
•
Hardware Overview
–
LED Indicators
–
Antennas
–
Power Socket
–
Reset
–
Reload
–
Description of the AP-8000 Unit
•
Prerequisites
•
System Requirements
•
Product Package
•
Optional Accessories
•
Hardware Installation
–
Attach the Cables
–
Power on the Unit
–
Install the Antenna
–
Initialization
•
Initialization
–
Using ScanTool
•
Installing the Software
–
Install Software Using TFTP Server
Hardware Overview
The Access Point supports dual radio operations using the 2.4 GHz and 5 GHz, and has six antenna connectors. The
Access Point support dual radio operation using 2.4 GHz and 5 GHz. It contains two 802.11a/b/g/n radios that can
operate independently on 2.4 GHz and 5 GHz. It contains 6 antennas, 3 for each radio.
LED Indicators
The top panel of the AP-8000 has the following LED indicators:
•
The Power LED provides whether the device is switched on/off.
•
The Ethernet LED signals Ethernet traffic on the wired Ethernet LAN
•
The Wireless Interface (Radio)1 LED provides the status and the speed on the wired Ethernet LAN.
•
The Wireless Interface (Radio)2 LED provides the status of the wireless radio.
AP- 8000 User Guide
2
10