Wireless - Proxim ORiNOCO AP-8000 User Manual

Using Web Interface to Manage the Access Point
Configuring the Device
Figure 6-3 Configuration Main Page
2. Navigate and click the link that corresponds to the parameter you want to configure. For example, click Network to
configure the Access Point's TCP/IP settings.
Each Configuration link is described in the remainder of this chapter.

Wireless

You can configure the following parameters within the Wireless Configuration page:
Interface 1
NOTE: By default both the Interfaces are active. If you want, you can change the default values for one Interface.
You can view and configure the following parameters for the Interface 1 and Interface 2:
VAP
1. Click Configuration > Interface 1> VAP. The Wireless Interface - 1 page will display as shown in the Figure
AP-8000 User Guide
58