Proxim ORiNOCO AP-8000 User Manual page 126

Using CLI to Manage the Access Point
Configuring the Device Using CLI Commands
protocol-name: Deny IP Broadcasts
direction: both
row-status: notInService
}
index 5 {
protocol-name: Deny IP Multicasts
direction: both
row-status: notInService
}
Global Filter Flag configuration
You can Enable Global filter Flag by following the command.
Device-Name(config-dev<config>-filter)# global-filter-flag
Identifier <enable(1)/disable(2)> required
Device-Name(config-dev<config>-filter)# global-filter-flag enable
Device-Name# show configure filtering global-filter-flag
// RUNNING-CONFIGURATION //
// Filter Control Configuration //
filtering {
global filter flag: disable
}
Intra BSS configuration
The wireless clients (or subscribers) that associate with a certain AP form the Basic Service Set (BSS) of a network
infrastructure. This feature enables you to prevent wireless subscribers within a BSS from exchanging traffic.
Device-Name(config-dev<config>-filter)# intra-bss
Identifier <enable(1)/disable(2)> required
Device-Name(config-dev<config>-filter)#intra-bss enable
Device-Name# show configure filtering intra-bss
// RUNNING-CONFIGURATION //
// Filter Intra BSS Configuration //
filtering {
intra-bss: disable
}
Protocol Filter Table Configuration
The Ethernet Protocol Filter blocks or forwards packets based on the Ethernet protocols they support. Perform the
following commands to configure Protocol Filter table entries.
(config)# dev-configure
(config-dev<config>)# filtering
(config-dev<config>-filter)# protocol-filter
(config-dev<config>-filter-protocol)# ?
Possible completions:
exit
filter-type
interface-control
protocol-table
(config-dev<config>-filter-protocol)# filter-type passthru
(config-dev<config>-filter-protocol)# interface-control ethernet
(config-dev<config>-filter-protocol)#protocol-table
(config-dev<config>-filter-protocol-table)# index 0 row-status 4
(config-dev<config>-filter-protocol-table)# index 0 protocol-name string
Exit from configure mode
Ethernet Protocol Filtering Type
Ethernet Protocol Filtering Control
Ethernet Protocol Filter Table
AP-8000 User Guide
126