Table of Contents
Advertisement
B. Harmony 802.11b Access Point Specifications
The following technical specification is for reference purposes only. Actual
product's performance and compliance with local telecommunications regulations
may vary from country to country. Proxim, Inc. will only ship products that are
type approved in the destination country.
Network Interfaces
Data Rate
Media Access Protocol
Ethernet compatibility
Frequency Band
Channels
Output Power
Operating Temperature
UL Listed Power Supply
Warning!
It is the responsibility of the users of the Harmony 802.11b Access Point
Model 8550 to guarantee that the antenna is operated at least 20 centimeters
from any person. This is necessary to insure that the product is operated in
accordance with the RF Guidelines for Human Exposure which have been
adopted by the Federal Communications Commission.
Ethernet 10Base-T (Twisted-Pair)
11, 5.5, 2, and 1 Mbps —IEEE 802.11b
10 Mbps — Ethernet
IEEE 802.11b
IEEE 802.3
2.4-2.5 GHz Worldwide (Depends on country)
(spread spectrum direct sequence)
2 to 14 (Depends on country)
11 for the United States; 3 independent Channels
13 dBm or 20 mW
0ºC to +50ºC
The 802.11b Access Point requires power from either a
Harmony Power System or from an external power
supply. The Harmony 802.11b Access Point includes a
UL listed, Class 2 power supply.
25
Advertisement
Table of Contents
