Harmony Openair Access Point Specifications - Proxim 7550 User Manual

B. Harmony OpenAir Access Point Specifications
The following technical specification is for reference purposes only. Actual product's
performance and compliance with local telecommunications regulations may vary from
country to country. Proxim, Inc. will only ship products that are type approved in the
destination country.
Network Interfaces
Data Rate
Media Access Protocol
Ethernet compatibility
Frequency Band
Independent Channels
Output Power
Operating Temperature
UL Listed Power Supply
Warning!
It is the responsibility of the installer and users of the Harmony OpenAir Access
Point Model 7550 to guarantee that the antenna is operated at least 15 centimeters
(6 inches) from any person. This is necessary to insure that the product is operated
in accordance with the RF Guidelines for Human Exposure which have been
adopted by the Federal Communications Commission.
Ethernet 10Base-T (Twisted-Pair)
1.6 Mbps — OpenAir
10 Mbps — Ethernet
OpenAir
Ethernet packet types and Ethernet Addressing
2.4-2.5 GHz Worldwide (Depends on country)
(spread spectrum frequency hopping)
15
100 mW or 500 mW (Depends on country)
-20ºC to +60ºC
The OpenAir Access Point requires an external power
supply. The Access Point includes a UL listed, Class 2
power supply. If you have elected not to use the external
power supply from Proxim or need a replacement, you
must use only a UL listed, Class 2 power supply, rated
min. 1A between 6 and 15VDC.
32