Sntp Configuration; Syslog And Hosttable Configuration - Proxim ORiNOCO AP-8000 User Manual

Using CLI to Manage the Access Point
Monitoring the Device Using CLI Commands
// EventLog Configuration //
eventlog {
priority: critical
log-reset: 0
}

SNTP Configuration

SNTP allows a network entity to communicate with time servers in the network/internet to retrieve and synchronize time
of day information. When this feature is enabled, the AP will attempt to retrieve the time of day information from the
configured time servers (primary or secondary), and, if successful, will update the relevant time objects in the AP. Perform
the following commands to configure the Simple Network Time Protocol.
(config-monitor)# sntp
(config-monitor-sntp)# day-light-savingtime unchanged
(config-monitor-sntp)# primary-server-name time.nist.gov
(config-monitor-sntp)# secondary-server-name string
(config-monitor-sntp)# sntp-status disable
(config-monitor-sntp)# time-zone dateline
Device-Name# show monitor sntp
// RUNNING-CONFIGURATION //
// SNTP Configuration //
sntp {
status: disable
primary-server: time.nist.gov
secondary-server:
time-zone: dateline
daylight-saving-time: unchanged
current-time: 01-01-1970
}

Syslog and Hosttable configuration

(config-monitor)# syslog
(config-monitor-syslog)# priority emergency
(config-monitor-syslog)# status enable
(config-monitor-syslog)# host-table
(config-monitor-syslog-host<tbl>)# index 0 ipaddress 10.0.0.1
(config-monitor-syslog-host<tbl>)# index 0 port 80
(config-monitor-syslog-host<tbl>)# index 0 row-status createAndGo
Device-Name# show monitor syslog
// RUNNING-CONFIGURATION //
// SysLog Configuration //
syslog {
status: enable
priority: critical
reset: 0
}
// Host Table Configuration //
Using the show command with the following table parameters will display operating statistics for the AP.
0:29:05
AP-8000 User Guide
138