Using Web Interface to Manage the Access Point
Configuring the Device
3. Click Add under the TCP/UDP Filter table.
4. In the TCP/UDP Port Filter Add Row page, enter the Protocol Name to filter.
5. Set the destination Port Number (a value between 0 and 65535) to filter. See the IANA web site at
http://www.iana.org/assignments/port-numbers for a list of assigned port numbers and their descriptions.
6. Set the Port Type for the protocol: TCP, UDP, or both (TCP/UDP).
7. Set the Interface to filter:
•
Only Ethernet
•
Only Wireless
•
Both
8. Set the Table Status:
•
Enable
•
Disable
9. Click Add
.
Figure 6-34 TCP/UDP Port Filter Table - Add Entries
AP-8000 User Guide
80